Copyright 2010© All Rights Reserved This is the Official Website of Gasket Factory Branch of AL-IMAN Factories Co.  Graphics Designs, Animation, and Scripting are copyrighted by the author.   http://www.imangaskets.com RING JOINT TYPE GASKETS  Ring joint gaskets are metallic sealing rings suitable for high pressure and high temperature applications and are fitted in ring groove type flanges. They are  widely used in the Oil / Petrochemical industry and in valves and pipe work. Choice of material may be determined to suit higher temperatures and  aggressive media. They comply with ASME B16.20 standards and API spec 6A.  IRTJ AL-IMAN TYPE R RING GASKET  The AL-IMAN IRTJ Type R ring gaskets are manufactured  according to ASME B16.20 : 1998 and API 6A. The type R  oval configuration was the original design and was  followed by the type R octagonal which offered more  specific contact areas. General Characteristics and Applications IRTJ AL-IMAN TYPE RX RING GASKET  The AL-IMAN IRTJ Type RX pressure-energized ring  gaskets are manufactured according to ASME B16.20 :  1998 and API 6A. The type RX series is of higher strength  materials designed primarily for well-head pressures of  700 bar and beyond.  IRTJ AL-IMAN TYPE BX RING GASKET  The AL-IMAN IRTJ Type BX pressure-energized ring  gaskets are manufactured according to ASME B16.20 :  1998 and API 6A. The type BX series is of higher strength  materials designed primarily for special applications  involving high pressures up to 20,000 psi.  RING-JOINT TYPE